Page 5


This is a close-up of the RF connection to HI-Q quick disconnect.   The origninal installation used
a BNC bulkhead connector mounted on an aluminum bracket, to make the connection between  
the antenna jumper and the RF cable that connects to the TS-480HX.  This didn't work.  The        
BNC connectors eventually fail and have to be replaced about every six months.  The new plan is
to go back to the good old UHF bulkhead and PL-259 connectors.                                                  

This photo shows the HI-Q quick disconnect with the antenna removed.


Next Page

Previous Page

Home